Setting a realistic time frame for a new bathroom installation is essential. A full refit can take several weeks and cannot be completed in a few days. However, you should not set yourself up for disappointment by imposing an unrealistic timeframe. You should always allow time for thorough planning, framing, tiling, flooring, and installation.
Pre-construction
Before any work begins on a new bathroom, pre-construction must be completed. This process involves tearing out the old bathroom and setting up the new one according to the specifications of a demolition. The workspace must be clean, with every surface flat and nail-free, and every piece of trim removed. The build team will then clean the space until it’s spotless.
Whether it’s a total makeover or a minor modification, pre-construction is the crucial step in any remodeling project. The contractor needs time to measure the space and determine what features and fixtures will fit best. He will also estimate the cost of the remodeling project. It’s essential to work with an experienced contractor because even a small change can make a big difference. Usually, it takes between one to four weeks to finish a bathroom remodel.
A design-build contractor can assist you with this step, as we will work with you to understand your design and aesthetic preferences. They can also help you determine what type of materials will be used.
Framing
Framing a new bathroom involves several stages. First, permits must be obtained, the area is completely torn down and rebuilt, and the work is inspected. Once this is complete, it is time for the finishing touches: ceramic tile, mirrors, lights, and shower curtains. Next, any excess construction debris must be cleaned up. This includes polishing surfaces and wood shavings.
While basic bathroom renovations don’t require much framing, larger renovations might require more. The most common framing tasks include building a chase wall, back framing for drywall, and reframing the shower. Because these projects require multiple contractors, they may take more time.
Demolition of the old bathroom and installation of new drywall will take time, and may extend the duration of the project by two to three days. If the bathroom has asbestos, this may add an additional day or two. Framing a new bathroom takes time and requires careful planning.
Tiling
The length of time needed to refit a new bathroom depends on the design and amount of work required. A full refurbishment can take from 10 to 14 days. This time will include the removal of existing items, wall preparation, and tiling, as well as any alterations to pipes. On the other hand, a simple bathroom refit with no alterations can be done in a shorter time.
Depending on the size of the room, the tiling process can take anywhere from a few days to several weeks. If the walls are made of plain vinyl flooring, this process can take up to a day, but if you’re using engineered wood, it may take two or three days. Once the screed has been laid, the contractors will then begin to fit the tiles. This can take a day or more and will involve straightening and strengthening walls.
If you’re a homeowner, you can choose to hire different contractors for the project. Using multiple contractors will allow you to take advantage of each one’s specialties, which means your project will be finished faster. The downside to this is that multiple contractors will likely cause delays and make coordination between them more difficult.
Flooring
The time it takes to refit a new bathroom depends on the size of the room and the amount of work that needs to be done. The average time for a complete bathroom refit is around 10-14 days, but this can vary. This timeframe includes the removal of existing items, wall preparation, tiling, floor laying, and any necessary alterations to the plumbing. The process can be much shorter if you just want to replace the bathroom suite, such as the shower, sink, and toilet.
The time to fit a new bathroom is dependent on several factors, including the size of the room and the builder. Larger bathrooms can take up to twice as long as smaller ones. There are also unforeseen challenges such as problems with the walls and floorboards, which can delay the project.
The layout of a new bathroom is very important and it’s important to get this right. Getting the layout right can make a big difference in the design of the room. If you already have a layout that you like, keep it. This will cost less and it will give the bathroom a fresh look. Alternatively, you can update the fittings and repaint the walls. You can also consider rehanging or fitting sliding doors to gain extra space.
Hire a Professional Bathroom Renovations Crew in Winnipeg
If you’re looking to install a new bathroom, look no further than working with a professional bathroom renovation contractor in Winnipeg. We serve the city of Winnipeg and nearby towns in Manitoba, and we have years of experience working with all sorts of bathroom renovation projects.
We know that every bathroom is different, and we tailor our services to each individual project. We’ll work with you to figure out exactly what you need, and we’ll make sure that the final product is something that you’re happy with.
If you’re not sure where to start, we can help you figure out a design that will work for your space. We’ll take into account the size of the room, the layout of the existing plumbing, and any other factors that will affect the project.
We’re dedicated to providing our clients with the best possible service, and we’ll work tirelessly to make sure that your project is finished on time and on budget. Contact us today to get started on your bathroom renovation or installation project!
